Welt Edge 1.0 2026

Mountain bikes

Welt Edge 1.0 — the entry point into the Edge line for riders who want a bike with trail geometry, a 140 mm air-sprung fork, and a 1x12 drivetrain. It is a great fit for forest trails, technical sections, and weekend rides.

Color:

Frame size:

Wheel Size:

Character in every detail.

Purposes

Edge 1.0 is built for trail riding, forest routes, and sections where you have to work with terrain, roots, and rough ground. This is a bike for riders who want more drive and more confidence on challenging trails.

Adventure Terrain

Forest, roots, rocks, rough dirt roads, and routes with noticeable elevation changes — this is where Edge 1.0 feels confident and predictable.

Key highlights

Alloy 6061 frame, Boost, UDH, internal cable routing, tapered head tube, dropper-post ready — a modern, stiff platform with a strong reliability reserve.
Uding UD-34 Dual-Air air-sprung fork, 140 mm, 34 mm stanchions, Rebound, HLO — handles bigger bumps better and gives more control on the trail.
S-Ride 1x12 drivetrain — a simple, user-friendly setup with a wide gear range for hilly routes.
11–50T cassette — helps with easier climbing and maintaining pace on the trail.
IIIPRO IV3 brakes with a 4-piston front caliper and 2-piston rear caliper — powerful and more confident braking on descents.
Industrial-bearing hubs and 6 pawls — smoother rolling, fast engagement, and improved reliability.
Sleeved, Tubeless Ready rims, with tape and valves included — ready for tubeless installation.
Maxxis Rekon 29x2.6 EXO tires — high volume, strong grip, and extra puncture protection.
Wide 760 mm handlebar and short 50 mm stem — precise steering and confidence on demanding terrain.

Edge 1.0

Welt Edge 1.0 is a trail hardtail for riders who want more drive and control on challenging routes. The lightweight 6061 aluminum frame with Boost axles, UDH, internal routing, and dropper-post readiness creates a modern base, while the Uding UD-34 Dual-Air 140 mm fork helps you ride rough sections confidently and keep control on descents.

The 12-speed S-Ride drivetrain with an 11–50T cassette gives a practical gear range for climbs and fast sections, while the powerful IIIPRO IV3 hydraulic brakes provide confident slowing even on demanding trails. Tubeless-ready rims, Maxxis Rekon 2.6 EXO tires, and industrial-bearing hubs make the bike more composed, reliable, and predictable in motion.

Great choice for:

For riders who want an aggressive hardtail for trails and rough terrain.

Specs

Frame set

Frame

Alloy 6061, Boost, UDH, Compensation, Inner cable routing, Tapered HT. 29x2.6 Friendly, Dropper post ready, Noise Reduction Foam

Fork

Uding: UD-34 Dual-Air, 140mm travel, Rebound, HLO

Fork type

Air

Fork travel

140

Wheels & Tires

Rims

DR-300, Sleeved, Pistoned, Tubeless ready, 30C + Tubeless Tape Installed

Wheel Size

Hubs

DH908T: 2+4 Sealed Bearings, 6 pawls

Tires

Maxxis Rekon: 29x2.6, Wire / EXO

Tire Width

2.6

Drivetrain

Rear Derailleur

S-Ride RDM-620: Super-Clutch, 12sp

Front Derailleur

Shifters

S-ride SL-M610: 12sp

Crankset

Senicx FM-3: Hollow Axle, 32T

Gears

Cassette

Sunshine HR12-50L: Lightweight, 11-50T

Brakes

Brakes type

Hydraulic disk

Brake front

IIIPRO - IV3: IV2 Lever+ IV4 Brakes, 4/2 Pistons

Brake rear

IIIPRO - IV3: IV2 Lever+ IV4 Brakes, 4/2 Pistons

Extra

Handlebars

JH-350 ALLOY, 35mm, 760mm, 9° Backsweep

Saddle

K-285, XC/Trail series

*Technical characteristics given for information only, subject to modification *Photos are non-binding

Geometry

Sizing table

Frame size letter	M	L	XL
Wheel size	29	29	29
A — Seat tube height (mm)	420	445	480
B - Effective top tube (mm)	620	647	675
C - Chain stay length (mm)	435	435	435
D - Head tube angle (degree)	64	64	64
E - Seat tube angle (degree)	75	75	75
F - Bottom bracket drop (mm)	55	55	55
G - Head tube lenght (mm)	117	121	125
H - Reach (mm)	634	643	647
I - Stack (mm)	450	475	502
J - Wheelbase (mm)	1224	1250	1279